Payment & Shipping Terms:
|Material:||Steel Wire||Mesh Hole:||50mm X100mm, 75mm X75mm,|
|Customise:||Acceptable||Life Duration:||≥ 25 Years|
wire box retaining walls,
gabion rock wall cages
Galfan Welded Gabion Container 4mm Metal Mesh Box Aperture 5x10cm
Welded gabion box is high quality steel mesh. They can be filled on site with hard durable stone materials to form mass gravity retaining structures. Owing to their inflexibility, welded gabions can not adapt to differential settlement or be used in water courses. In comparison with woven wire gabions, welded gabions offer a higher strength. In order to meet diffferent project requirements, various wire diameters and unit sizes available for welded gabion boxes.
Details of welded gabion box :
Material: Galvanized steel wire or Galfan / zinc-5%aluminum wire
Use Life: 10-20 years
Wire diameter: 3.0mm- 6.0mm
Aperture: 25*50mm 50*50mm 75*75mm 76.2*76.2mm 50*100mm etc
Gabion size:1*1*1m 1*0.5*1m 1*1*2m or as request.
Finish: hot dipped galvanized,galfan wire,PVC coated
Welded method: welded after galvanized or galvanized after welded
Packing: Wrapped with shrink film then packed in wooden fumigation pallet or iron pallet
|Nominal Box sizes ( m)||No. of diaphragms (no.)||Capacity per box (m3)|
|1.0 × 1.0 × 0.5||Nil||0.50|
|1.0 × 1.0 × 1.0||Nil||1.00|
|1.5 × 1.0 × 1.0||Nil||1.50|
|2.0 × 1.0 × 0.5||1||1.00|
|2.0 × 1.0 × 1.0||1||2.00|
|3.0 × 1.0 × 0.5||2||1.50|
|3.0 × 1.0 × 1.0||2||3.00|
|4.0 × 1.0 × 0.5||3||2.00|
|4.0 × 1.0 × 1.0||3||4.00|
Welded gabion box advantages:
How to install welded gabion box?
Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the
line and cross wires on the front and side faces. None are needed in interior cells.
Step 4. Gabion box filled with graded stone by hand or with a shovel.
Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the upper tier. Secure with
spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.
Contact Person: Julia
Tel: +86 177 3408 2565