Overhead Netting to Prevent Drone Intrusion | Durable Nylon Safety Net

Heavy-Duty Anti-Drone Overhead Protection Net — 50×50 mm Mesh / 3 mm Nylon Cord

Product Overview

Our Overhead Netting to Prevent Drone Intrusion is a high-strength nylon safety net engineered to intercept and disable unauthorized UAVs before they reach the protected area. Installed horizontally above courtyards, perimeters, rooftops and open-air facilities, the net works as a physical barrier: incoming drones are stopped on contact, and their rotors become entangled in the 50 × 50 mm mesh, causing the aircraft to lose lift and drop harmlessly into the catch zone.

Unlike electronic counter-drone systems, this net requires no power supply, no signal interference and no operating license. It delivers 24/7 passive protection that cannot be jammed, hacked or detected by the intruder — making it the ideal low-cost layer in any multi-tier counter-UAS strategy.

Technical Specifications

Why 50 mm mesh + 3 mm cord?
The 50 mm aperture is small enough to prevent small drones and their propellers from passing through, yet large enough to keep the net lightweight and reduce wind load. The 3 mm nylon cord provides high tensile strength with excellent flexibility, allowing the net to absorb impact energy and entangle rotors instead of tearing.

Product Advantages

1. Effective Physical Interception
The 50 × 50 mm mesh catches propellers and landing gear on contact. Rather than deflecting a drone (which may allow a second approach), the net entangles and brings it down.

2. High-Strength, Durable Nylon
3 mm high-tenacity nylon cord with UV stabilizers — resistant to abrasion, moisture, rot and long-term sun exposure, with an outdoor lifespan of 5 years or more.

3. Zero Power, Zero Signal
No electricity, no jamming, no frequency interference. Fully passive protection that is unaffected by electronic countermeasures and compliant with radio regulations.

4. Lightweight with Low Wind Load
Open mesh structure allows air, light and rainwater to pass through, minimizing structural load on roofs, poles and frames — and keeping the area underneath usable.

5. Fully Customizable
Custom dimensions, mesh size, cord diameter, color and edge reinforcement to match your site layout and mounting structure.

6. Quick and Simple Installation
Reinforced perimeter rope with eyelets allows fast tensioning using cables, turnbuckles or hooks — a two-person team can deploy a large span in hours.

7. Low Maintenance Cost
No consumables, no calibration and no software updates. Periodic visual inspection is all that is required.

8. Scalable Multi-Layer Design
Can be installed as a single flat layer, sloped layer or multi-level "curtain + roof" combination for higher security requirements.

Applications

Installation Notes

1. Site survey — determine span, anchor points, slope and required coverage area.

2. Framework — use existing structures (poles, walls, roof trusses) or install steel/mast supports at 3–6 m intervals.

3. Tensioning — fix the net with stainless steel cable and turnbuckles; keep uniform tension with a slight sag (5–10 %) to absorb impact energy.

4. Layering — for high-risk sites, install a sloped layer above a horizontal layer so that entangled drones slide to a designated collection zone.

5. Inspection — check tension and cord condition every 6 months, and after severe weather events.

6.