Galvanized Steel Tank Barrier Net Wound Tank Tracks Plain Weave Wire Mesh Custom Carbon Steel Russia

Galvanized Steel Tank Barrier Net Wound Tank Tracks Plain Weave Wire Mesh Custom Carbon Steel Russia

Recently, our factory produced a new type of steel wire mesh named " Anti Tank Barrier", from its name, we know its usage to stop tank moving during war. How it works, please see the following information, and contact us.

The common size of Anti Tank Barrier Mesh is 10*10*1.4m and 10*5*1.4m, the wire thickness is from 0.5 till 0.8mm. it is Three-dimensional steel wire mesh. when it open, the thinner steel wire make this kind of mesh is difficult to find.

Inconspicuous obstacle (inconspicuous wire net, MZP, MZP putanka, putanka ) - a three-dimensional barrier made of carbon wire rings. The wire is very thin, so it is almost invisible. Refers to engineering non-explosive containment barriers.

Detailed information

The wire ring connection will form a four-layer space grid with a height of 1.4 meters, a length of 10 meters and a width of 10 meters. The kit consists of 40 connecting rings with a diameter of 0.8 mm annealing wire manufactured as standard GOST 3282-74 and 40 metal posts (25 cm long). The folding size is 1.2 x 0.6K 0.12m.

Production process

Secure the start of the 0.9 mm wire to one of the tubes at the start of a row.Lay a row of ramps in the correct direction, then return in the opposite direction following the pattern of laying the ramps to close the row of ramps.

Installation

Secure the start of the 0.9 mm wire to one of the tubes at the start of a row.Lay a row of ramps in the correct direction, then return in the opposite direction following the pattern of laying the ramps to close the row of ramps. Rewind the start of the wire secured to the tube (secured by winding) onto the last turn of the closed ramp. Do not cut the wire at the end of the row! Each row is braided with a single wire along all 20 layers!

1.Stretch two rows of coils to their full length