6mm High Tensile Polyester Knot Weave Rope Mesh 100mm Aperture Anti Drone Netting for Vehicle Canopy

6mm High Tensile Polyester Knot Weave Rope Mesh with 100mm Aperture for Vehicle Mounted Canopies

This heavy duty variant is built on 6mm high tenacity polyester rope with a 2200N breaking load and a 100mm aperture. The open grid keeps wind load low on vehicle mounted frames while the thick rope resists abrasion where the net rubs against roof racks, antenna masts and cargo edges. At 260 g/m2 it is the specification chosen for canopies that stay mounted for months rather than days.

Key Features

• 6mm rope, 2200N load - handles abrasion against vehicle frames and repeated tensioning.
• 100mm open aperture - low wind load, suitable for large canopy spans on trucks and trailers.
• Double knot weave - thick rope crossings lock the grid under vibration and travel.
• UV stabilized yarn - color and strength held through long outdoor service.
• Reinforced border - heavy border rope distributes load at anchor points.
• Field repairable - damaged sections rejoin with rope lacing, no metal fittings.

Technical Specifications

Field Applications

• Canopy netting above trucks, pickups and command vehicles
• Drone cages over generator and fuel storage compounds
• Large span protection over depot yards and parking areas
• Ship deck and port terminal drone netting
• Heavy duty civil cargo and fall protection netting

Packaging and Delivery

Heavy panels are rolled on cores, wrapped in woven fabric and strapped for forklift handling. A 10m x 10m panel ships as one roll under 60 kg. Lead time is 10 to 15 working days for stock colors and 25 to 35 days for custom panel sizes.

FAQ

Q: What span can a 6mm panel cover without center support?
A: With steel ring anchor points every 1m we recommend a maximum unsupported span of 8m; larger spans need a center cable.

Q: Is the 100mm aperture effective against small drones?
A: It stops larger multirotors and drops FPV frames into the net by rotor strike; for small props use the 40mm or 25mm mesh variants.

Q: Can steel rings be replaced with rope loops?
A: Yes, rope loops can be specified instead of steel rings for vehicle mounting where metal contact is not desired.