Product Details:
|
Raw Material: | Low Carbon Steel Iron Wire | Geotextile: | 250 G/㎡ Or 300 G/㎡ Standard |
---|---|---|---|
Technology: | Welded, Assemble, Stapled | Apeture: | 3" (76.2mm×76.2mm) |
Color: | Brown Color | Surface Treatment: | Galfan Coated |
Highlight: | wire mesh retaining wall,defence barrier |
Standard Welded Multi - Cellular Defensive Barrier Bastion Army Defensive Wall
Defnsive Barrier Bastion can be filled with sand, earth, cement,stone, then as a defence wall or bunker and widely used in the military to protect safety. It is manufactured from low carbon steel wire with high tensile strength,it is an electric fusion welded prefabricated joined grid consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing .It is electrically welded together then hot dipped galvanized or PVC coated, ensuring a longer life.
Brief Introduction for Welded Barrier Bastion Wall:
Material: Galvanized steel wire or Galfan / zinc-5%aluminum wire
Service Life: 15-20 years
Wire diameter: 3.0mm- 6.0mm
Aperture: 3" (76.2mm × 76.2mm ) Standard
Color of geotextile: Grey and Military, Beige, Sand Color and so on.
Weight of Geotextile: 250 g/m2 or 300 g/m2
Finish:hot dipped galvanized,Galfan wire.
Welded method:welded after galvanized or galvanized after welded
The Standard Technical Specifications from SX 1 to SX 19
Welded Military Gabion Barrier Wall | |||
Model | Height | Width | Length |
SX-1 | 54"(1.37M) | 42"(1.06M) | 32'9"(10M) |
SX-2 | 24"(0.61M) | 24"(0.61M) | 4'(1.22M) |
SX-3 | 39"(1.00M) | 39"(1.00M) | 32'9"(10M) |
SX-4 | 39"(1.00M) | 60"(1.52M) | 32'9"(10M) |
SX-5 | 24"(0.61M) | 24"(0.61M) | 10'(3.05M) |
SX-6 | 66"(1.68M_ | 24"(0.61M) | 10'(3.05M) |
SX-7 | 87"(2.21M) | 84"(2.13M) | 91'(27.74M) |
SX-8 | 54"(1.37M) | 48"(1.22M) | 32'9"(10M) |
SX-9 | 39"(1.00M) | 30"(0.76M) | 30'(9.14M) |
SX-10 | 87"(2.21M) | 60"(1.52M) | 100'(32.50M) |
SX-11 | 48"(1.22M) | 12"(0.30M) | 4'(1.22M) |
SX-12 | 84"(2.13M) | 42"(1.06M) | 108'(33M) |
SX-19 | 108"(2.74M) | 42"(1.06M) | 10'5"(3.18M) |
The Application for Defensive Barrier Bastions for Fortess Base
Flood Control
1. Flood Prevention Barrier
From a simple perimeter wall to a complex base infrastructure, SHUXIN products provide rapid expeditionary protection
2. Permanent or Semi-permanent Dike
Military Defensive Barriers can as the Dike against the Flood permanently or Semi-Permanently.
3. Flood Control Retaining Wall
Wiht sand and earth in it, Defensive Barrier Bastions can as a retaining Wall to against the flood.
4. Protection Engineering of Seaside Area
Military Gabion Box is more and more homemade at the seaside area as Protection Fence
5. Protecting Existing Structures
6. Coastal Erosion Control
The Advantages of Flood Protection Defensive Barrier Wall:
1. Lifetime
The unit must be made of a Wire Mesh basket which is manufactured from Galvanised coated, welded mesh. The mesh must be made of rust protected alloy materials.The Wire Mesh must have a guaranteed life of not less than 5 years while exposed to environment and 10 years when in store.
2. Collapsible
Mesh Panel is joint by spring which is a circle, Mesh Panle can turn 360° unobstructed, so, when shiping the goods, it is collapsible to save space.
3. Strong Protection
Thickner Mesh Panle together with thickner geotextile combined a strong Protection wall.
4. Fast and Simple Operation
A security wall using Sand earth-filled barrier can be filled by two persons and a standard front-end loader in just 20 minutes, the equivalent sized wall of 1,500 sandbags will take 10 persons up to 7 hours to fill and build.
Contact Person: Cora
Tel: +86-177 1719 2781
Fax: 86-318-7020290